Learn how to Build a Shelf Using Brackets

Brackets are available in a myriad of shapes and sizes. Using brackets to help and create a shelf permits the shelf to be coordinated with the room decor, be custom-sized, and be built by an intermediately skilled dwelling decor DIY-er. Several shelves, staggered on a wall, make a critical design statement. A shelf placed above a door is a discovered-space storage resolution, and a collection of cabinets running round a room’s perimeter, high on a wall, can make a lateral book case for a small library.

Step 1

Select brackets that can accommodate the chosen shelf. A typical shelf is 12 inches deep. This is the measurement from the entrance of the shelf to the wall. Brackets are basically “L” -formed; one leg of the L is hooked up to the wall, the opposite leg, which protrudes from the wall at a 90-degree angle, helps the shelf. The length of the protruding leg must be at least two-thirds of the depth of the shelf. For instance, if the desired shelf is 12 inches deep, the supporting legs of the bracket must be at least 8 inches. Normally, both legs of the brackets are the same length; however this just isn’t a hard rule.

Step 2

Choose the number of brackets to use for the shelf. If the brackets are spaced too far aside, the shelf will sag. A good rule of thumb is to place a bracket every 16 inches. Place one at each finish of the shelf, 1 inch from the outside edge, and each 16 inches along the shelf length.

Step three

Mark the wall, with the self-erasing marker, at the place of the underneathside of the shelf. Measure the gap from the floor to this mark. The ninety-degree angle of the bracket might be aligned with this mark. The shelf will sit on the legs of the brackets that protrude from the wall at this mark. Mark the wall, measuring up from the floor, at 16-inch increments, one location marker for each bracket and one mark for each of the tip brackets.

Step 4

Install the brackets onto the wall at the indicated bracket places, following the manufacturer’s directions for attaching the brackets to the wall.

Step 5

Place the shelf, centered, on prime of the brackets and insert screws up by the brackets into the underside of the shelf to secure it into position. It’s useful to pre-drill the screw holes to prevent a wood shelf from splitting.

When you have just about any inquiries regarding wherever along with how you can make use of Steel Shelf Brackets, you possibly can call us in our own web site.